• Visual Guidance
    • Preface
      • Information on compliance with communication regulations
      • General Safety
      • Important safety information
    • Overview of console
      • Turning the console on
      • Shutting down the console
      • Using the console toolbar
    • Description of user interface
      • Settings screen controls
      • Operations screen controls
      • Description of icons
      • View controls
      • Other icons
    • Quick setting guide
      • Software update instructions
      • Introductory guide
    • Region and User settings
      • Region settings
      • Lightbar setup
      • Environment configuration
      • Setting up map options
      • Setting access level
    • System function
      • Function configuration
      • GPS setup
      • Alarm settings
      • Setting flag points
    • Vehicle setup
      • Selecting a vehicle
      • Creating a new vehicle
      • Vehicle geometry configuration
      • Steering controller setup
      • Selecting vehicle antenna
    • Implement setup
      • Selecting an implement
      • Setting up a new implement
      • Implement geometry configuration
      • Section control setup
      • Configuring master switch
      • Configuration GPS speed emulation
    • Product configuration
    • Basic information on the Operations screen
      • Using the window toolbar
      • Using the navigation window
      • Viewing the guidance system
      • Viewing GPS information
      • View system diagnostic tests
      • Viewing job information
      • Monitoring using the dashboard
      • Storing information about jobs
      • Colour codes and operating status
      • Understanding default file names
    • Steering calibration
      • Calibrating the compass
      • Calibrating the wheel angle sensor
      • Mounting bias calibration
      • Resolving calibration errors/alarms
    • Field menu
      • Creating a client / farm / field
      • Selecting a client / farm / field
      • Setting a new boundary
      • Setting flag points
      • Unloading a field
    • Job menu
      • Creating a new job
      • Selecting an existing job
      • Job data logging
      • Export a job report
      • Deleting a job
    • Guideline menu
      • Using straight lines guidelines
      • Using identical curve guidelines
      • Using pivot guidelines
      • Using Guidelock guidance mode
      • Selecting an existing guideline
    • Autosteer
      • Autosteer status
      • Autosteer fine tuning
      • Engaging the autosteer function
      • Disengaging the autosteer function
    • Nudge menu
      • Using nudge options
      • Compensating for GPS drift
    • Inventory manager
      • Using the manager toolbar
      • Using Item Manager
  • Appendices
    • Common error messages
    • Technical Information
    • Glossary of terms
    • Information ownership
  • All Files
You are here: Visual Guidance > Basic information on the Operations screen

Basic information on the Operations screen

Using the window toolbar

The window toolbar allows access to the tools used to manage the guidance system.

The relative submenu options are displayed when a tool is selected.

  • Preface
  • Overview of console
  • Description of user interface
  • Quick setting guide
  • Region and User settings
  • System function
  • Vehicle setup
  • Implement setup
  • Product configuration
  • Basic information on the Operations screen
    • Using the window toolbar
    • Using the navigation window
    • Viewing the guidance system
    • Viewing GPS information
    • View system diagnostic tests
    • Viewing job information
    • Monitoring using the dashboard
    • Storing information about jobs
    • Colour codes and operating status
    • Understanding default file names
  • Steering calibration
  • Field menu
  • Job menu
  • Guideline menu
  • Autosteer
  • Nudge menu
  • Inventory manager

© 2016 SAME DEUTZ-FAHR ITALIA S.p.A.

Visual Guidance | User manual Rev. 20160727 307.U.T902.en.S.03